UNI-T Anemometers

UNI-T UT363S Anemometer This product comes with a 3-year warranty. The UNI-T UT363S anemometer is a small, stable and reliable handheld instrument for measuring wind speed and temperature, featuring a separate speed sensor that ensures rapid detection, low power consumption and high accuracy. The device can be used in many fields – such as mining, petrochemicals, energy, navigation – in aviation and maritime transport, in fan manufacturing or the installation of exhaust and air recovery ventilation systems, and in sport. Drop-resistant from a height of 1 m. Backlit LCD display measuring 35x32mm, with a four-digit display of wind speed and a simultaneous three-digit display of wind temperature. Powered by 3x 1.5 V batteries (AAA), automatic switch-off after 5 minutes of inactivity, which can be disabled. Product specifications: - wind speed measurement range: 0.4 ~ 30 m/s - the instrument and the measuring handle are connected by a high-speed wind measurement cable - measurement of maximum, minimum or average values - Temperature measurement range: -10°C ~ 50°C - Unit selection: °C or °F - Display backlight: yes Technical parameters: - wind speed measurement range: 0.4 m, resolution 0.4 m, accuracy ±3 (5% of reading +0.5) - wind speed measurement range: 1.4 ~ 108 km/h, (for guidance only), accuracy ± (5% of reading +15 digits) - wind speed measurement range: 0.7 ~ 58 knots, (for guidance only), accuracy ± (5% of reading +15 digits) range: 0.8 ~ 67 mph, (for guidance only), accuracy ± (5% of reading +10 digits) - wind speed measurement range: 78 ~ 5905 ft/min, (for guidance only), accuracy ± (5% of reading +180 digits) - wind speed measurement range: 1 degree, depending on the wind force measurement range: ~ 1 degree of measurement only), accuracy ± 1 degree - sampling frequency: 2 measurements per second - Temperature measurement range: -10 °C ~ 50 °C, resolution 0.1 °C, accuracy ± 2 °C (14 °F ~ 122 °F, resolution 0.2 °F, accuracy ± 4 °F) of the measurement value: maximum, minimum or average - 4 °F) MAX/MIN/AVG is displayed - Overload indicator ‘OL’: if the wind speed exceeds 45 m/s or the temperature is below -10 °C or above 50 °C, ‘OL’ is displayed. Wind speed sensor: based on the principle of magnetic induction - Temperature sensor type: negative temperature coefficient, NTC - measurement pause: “HOLD” is displayed - display backlight: yes, can be switched on/off - auto-off: yes, after 5 minutes of inactivity; can be disabled for continuous operation when voltage drops below 3.5V - battery powered: 3x 1.5V batteries (AAA) - device dimensions: 120mm x 53mm x 43mm - device weight: 365g - the device is intended for: indoor use - operating temperature and humidity: 0°C, humidity below 40% 40°C ~ 50°C (relative humidity below 45%) - Altitude: 2000 m - Storage temperature and humidity: -20°C ~ 60°C (relative humidity less than 75%) Package contents: UT3633 anemometer 1.5 V (AAA) batteries: 3 pcs - user manual Wholesale packaging: - Standard quantity per box: 20 pcs - standard box dimensions: 550 mm x 295 mm x 350 mm - standard gross weight per box: 7.2 kg MANU> MAN/F UNI-TREND https://www.uni-trend.com/

Leggere Di più Meno

This product comes with a 3-year warranty. The UT362H is a hot-wire anemometer, ideal for measuring air velocity and air temperature, thanks to its high stability, safety and excellent reliability. The device features automatic air flow calculation, allowing users to measure and record data in both indoor and outdoor applications. Measuring indoor air velocity and airflow is an important indicator for assessing air quality. Thanks to its slim, extendable probe, the UT362H is extremely useful for HVAC/R professionals, facilitating air measurement inside ventilation ducts. The device can be used in a wide range of sectors, such as: mining petrochemicals the energy sector maritime aviation and shipping fan manufacturing air conditioning systems ventilation systems Key features Extendable aluminium alloy rod, lightweight and durable Separate design with retractable probe for easy measurements Platinum resistance sensor Storage of up to 99 data sets Precise measurement of low air flows Mode for measuring volumetric flow in ducts Lightweight, ideal for professional use Technical specifications Air velocity measurement 0 ~ 30 m/s, accuracy ±(4% + 0.1 m/s) 0 ~ 108 km/h, accuracy ±(4% + 0.4 km/h) 0 ~ 5906 ft/min, accuracy ±(4% + 20 ft/min) 0 ~ 11 Bft, accuracy ±(1 Bft) Air flow measurement 0 ~ 999,900 m³/min (resolution 0.001 ~ 100) 0 ~ 999,900 CFM (resolution 0.001 ~ 100) 0 ~ 999,900 L/s (resolution 0.001 ~ 100) Temperature measurement Range: -20 ~ 70 °C Resolution: 0.1 °C Accuracy: ±0.5 °C Range in °F: 32 ~ 158 °F Resolution: 0.1 °F Accuracy: ±1.5 °F Additional functions Supported pipe shapes: circular, rectangular, flat Dimension settings for rectangular sections (width & height) Units of measurement: Area: m², ft² Air flow rate: m³/min, CFM, L/s Air velocity: m/s, ft/min, km/h Temperature: °C / °F Start-up warm-up time: 5 seconds Measurement mode: fast / slow Sampling time: 0.5 s Data Hold function Display of MAX / MIN / average / multi-point average values Internal memory: 99 data sets Backlit LCD screen Automatic switch-off after 5 minutes of inactivity (can be disabled) Flexible probe length: 120 cm Low battery indicator Operating conditions Operating temperature: 0 ~ 40 °C Operating humidity: ≤80% RH Storage temperature: 0 ~ 40 °C Storage humidity: ≤80% RH Power supply and dimensions Power supply: 3 × 1.5V AAA batteries (included) Dimensions: 180.3 × 63.0 × 40.1 mm (main unit) Weight: approx. 312 g (excluding batteries)

Leggere Di più Meno

UNI-T UT362 USB Anemometer This product comes with a 3-year warranty. The UNI-T UT362 USB anemometer is a small, stable and reliable handheld instrument for measuring wind speed and temperature, featuring a separate speed sensor that ensures rapid detection, low power consumption and high accuracy. The anemometer allows automatic measurement at predetermined intervals of 0.5 to 255 seconds and the storage of values in the internal memory for up to 2044 records, with subsequent transfer to a computer via the USB interface. Large backlit display (57 mm x 37 mm), showing wind speed and temperature simultaneously. The device can be used in many fields – such as mining, petrochemicals, energy, navigation – in aviation and maritime transport, in the manufacture of fans or the installation of exhaust and air recovery ventilation systems, as well as in sport. Powered by a 9V alkaline battery, with automatic switch-off after approximately 10 minutes of inactivity, which can be deactivated. Product specifications: - wind speed measurement range: 0 ~ 30 m/s - the instrument and the measuring handle are connected by a cable - with high-precision anemometer tip - reliability - wide selection of wind speed units (VEL): (m/s, km/h, ft/min, MPH, KNOTS) - Selection of wind flow units (FLOW): CMM (cubic metres per second), CFM (cubic feet per minute) - wind speed measurement modes: MAX, MIN, real-time , MAX, wind flow mode , MAX, MAX, MAX2, MAX, MAX in real time - temperature measurement range: 10°C ~ 40°C - unit selection: °C or °F - Display backlight: yes - Data Hold: yes - automatic interval recording function: 0.5 to 255 s - Data storage: up to 204/4 records per PC storage yes Technical parameters: - Wind speed measurement range: 2 m/s to 10 m/s, resolution 0.1 m/s, accuracy ± (3% of reading + 0.5) - wind speed measurement range: 10 m/s to 30 m/s, resolution 3%, measurement accuracy ± (3% of reading +0.8) - wind flow measurement (CMM): 0.001 to 9999 x 100 - wind flow measurement (CFM): 0.001 to 9999 x 100 - Sampling rate: approx. 2 measurements per second - Temperature measurement range: 10°C ~ 40°C, resolution 0.1°C, accuracy ± 3°C (32°F ~ 104°F, resolution 0.2°F, accuracy ± 4°F - measurement of maximum, minimum or average values: MAX / MIN of the wind sensor type based on the wind sensor display principle: MAX / MIN. magnetic induction - temperature sensor type: negative temperature coefficient, NTC - measurement pause: HOLD is displayed - data storage: 2044 records - USB interface: yes - display backlight: yes, can be switched on/off - Auto-off: yes, after 10 minutes of continuous operation / disabled - Battery indicator: when voltage drops to ≤ 7.2V - battery powered: 1 x 9V (6F22) - device dimensions: 162 mm x 78 mm x 30 mm - device weight: 375g - product colour: red and grey - operating temperature and humidity: 0°C to 35°C (32°F to 122°F), (relative humidity less than 75%) - Storage temperature and humidity: -20°C to 65°C (-4°F to 149°F) (relative humidity less than 75%) - pressure: 500 mbar to 2 bar Contents: UNI 2T USB pack - 9V battery (6F22): 1 pc - USB interface cable: 1 pc - CD with PC software - User manual Wholesale packaging: - Standard quantity per box: 10 pcs - Standard box dimensions: 460 mm x 2135 mm, gross weight: 6.8 kg MANUFACTURER: UNI-TREND https://www.uni-trend.com/

Leggere Di più Meno